Preventive Measures for Sutorbilt Blowers and Pumps

The sutorbilt blowers and pumps are usually very important parts of many pneumatic systems and industries where there are pneumatic processes. They should be taken utmost care of to prevent from the damage. Its maintenance on daily basis would save the cost of sutorbilt blower repair in the long run.

 So, please find the below measures which should be taken to prevent them from damage and increase their life.

• Check the oil levels on daily basis.
• The dust needs to be clear at regular intervals.
• The intake filters (if any) need to be cleaned in every two days. The filters are usually washable; they can be washed with lukewarm water and mild detergents. The filters should be changed if required.
• Silencers should be checked often if there is any kind of deterioration.
• The oil change should be done every 500-1000 hours of operation; look the manuals for different blowers. Please check the type of oil when the oil is to be changed.
•  While working, don’t exceed the speed limits as mentioned on the plates.
•  If the oil or lubricant has started to turn black or like a tar, then it is high time to change the oil. If this is overlooked, the bearing and gears will also start to damage sooner.
• The oil has to be maintained in appropriate quantity. Inadequate oiling or lubricating can be dangerous in the long run.
•  Keep a watch if the colors of the parts of sutorbilt blowers are changing. For instance, the olden color of the rotor fades. The end plates or housing turns purple, etc.
• Do not run the blowers if there is any sort of adjustments or repairs pending.
•  Check all the safety devices periodically.
• If there is any noise or unusual vibration pattern in the blower, you need to call a sutorbilt blower repair company immediately.

·         Follow the guidelines mention in safety manuals of the blowers.

These were few important preventive measures and maintenance rules to be followed for the long life of the sutorbilt blowers and pumps. Keep these rules in mind while operating them.